Pages:
Actions
  • #1 by nazgul1972 on 14 Apr 2016
  • Hello

    I would like to test a trigger using the Over/Under 2.5 Goals market if some pre-conditions are ok.

    It's a pre-match trigger (said 10 (constant) minutes before K.O)

    1) To check in the match odds market if the price of the draw is between X and Y (constants)

        AND no gap between back price and lay price (or at least no more than 2 ticks)

        AND matched volume is greater or equal to X (constant)

    2) If those conditions are ok, then

        lay over or Under 2.5 Goals this way :

      A)                                       BACK   LAY
       
          Under 2.5 Goals              2.28    2.3
          Over   2.5 Goals              1.77    1.79

    -> in this case, lay over 2.5 Goals


    B)                                          BACK   LAY

           Under 2.5 Goals              1.96     1.98
           Over   2.5 Goals              2.02     2.04

    -> in this cas, lay Under 2.5 Goals

    So, always lay the market (over or Under) whose odds are between 1.80 and 1.99 (constant)

    + Condition : min matched volume is = or greater than 1000 (constant)

    + no gap between back and lay or at least, less than 2 ticks (units?)

    I would like to input a fibonacci laying staking plan with this sequence:

    1-1-2-3-5-8-13-21-34(units)

    Init bet = 1 unit
    Max steps in the sequence = 9
    If the bet win, reverse back to step 1

    Best regards

    Marc


  • #2 by mcbee on 14 Apr 2016
  • hi
    here is your trigger,in the constants you can set.
    Initial bet size
    Maximum number of steps in the sequence
    Minutes before the start time to check match odds
    Minutes before the start time to stop checking match odds
    Minimum back price for match odds
    Maximum back price for match odds
    Minimum tick difference match odds and 2.5 market
    Minimum matched volume for match odds
    Minimum lay price for 2.5 market
    Maximum lay price for 2.5 market

    please use test mode until you are happy with your settings

    mcbee

    download the trigger below
  • #3 by nazgul1972 on 14 Apr 2016
  • A huge thanks to you, Mc Bee
  • #4 by nazgul1972 on 16 Apr 2016
  • Hi Mc Bee

    Trigger is looking good but sometimes, the sequence stops.

    If a look to matchs to come, even if conditions are met (draw between 3.5 and 4.2) and odds in the O/U 2.5 are ok too, it doesn't fire.
    If i press reload, then it fires. But the idea is of course not doing manualy what the bot is design for :-)
    Do you have an idea ?

    Maybe it's because of me settings ? My strike rate is around 50% (exactly what I was thinking). Do I have to disable withdraw events after they settled ?

    Best regards

    Marc
  • #5 by mcbee on 22 Apr 2016
  • hi
    sorry for the late reply.
    you requested the trigger with a staking plan and all staking plans need the last market to be settled so that the next bet calculation can be completed.

    mcbee
  • #6 by nazgul1972 on 25 Apr 2016
  • Dear Mc Bee,

    Trigger is going very well.

    Thanks a lot

    Marc
Pages:
Actions