Author Topic: Repeat block  (Read 1005 times)

Tags:
  • All members
  • Posts: 9
Repeat block
« on: 28 Nov 2017, 19:22 »
Hi, i'm developing my own triggers and i have one problem.

When the odds are below 1.50 i want to place 1 lay bet @ 1.50, other @ 1.40 and other @ 1.30 in "one batch".

how do i do this?

Can i do this with just one block?

I use in the block execute, specific number of times = 3 and post the bets, but the 3 times are not always one after another... sometimes if fires on time in a market (tha fullfill the conditions), a couple in another, 3 in other.... but i want the 3 bets to post at the same time... or at least not swap marckets until the 3 bets are post.

Can i make a trigger just to post a bet and execut it from another trigger?

I don't understand if the triggger evaluates the condition in each repetition or just one and if the conditions are meet it fires 3 times... or each time it evaluates the conditions.

Which is the diference with the field repeat in the block? Should i use this field?

I just want that when the conditions are met, the trigger post 3 bets in that market and when this is done, go to the next market....

Tks!

  • Moderator
  • Posts: 3597
*
Re: Repeat block
« Reply #1 on: 28 Nov 2017, 19:41 »
Hi
I don't think you need to repeat any triggers or blocks, just use three trigger actions in one trigger, see attached screenshot and try in test mode first.
Please read the following disclaimer with regards to the information you may request and obtain on our forum. This specifically concerns trigger files and various instructions as to how to implement a strategy.

  • All members
  • Posts: 9
Re: Repeat block
« Reply #2 on: 28 Nov 2017, 19:59 »
i tried it too.... and i thik didn't work.... but i'll will try again.

tks!

 

Please note, BetFair is seems to be currently OFFLINE