Pages:
Actions
  • #1 by Talha on 20 Jul 2024
  • Hello,

    why the trigger does not start, but before it worked for more than 10 days?

    Is it possible to run multiple triggers simultaneously?

    Tnx


  • #2 by MarkV on 20 Jul 2024
  • Hi
    From your screenshot it looks like there are no markets in My Markets. Either add some markets to My Markets or use the Market Locator and Scheduler to automatically add markets.

    It is possible to run multiple triggers simultaneously. You can use 1 trigger file but you need to make sure the different triggers do not interfere with each other. This article gives an example. But the better way is to run multiple instances of MFP. In the helpfile section "Login Window" it explains how.  
  • #3 by Talha on 20 Jul 2024
  • Thank you for your reply.

    I found that after a few minutes, the trigger went off. Then after a while it stopped working again.

    I use a VPS. Could it be a VPS problem? That it is not powerful enough?
    Data from VPS:


    The most interesting thing is that the trigger worked fine for 10 days, and then these problems started.
  • #4 by Talha on 20 Jul 2024
  • I am adding VPS data:
    solated resources 24/7/365
    Fastest 2GB RAM DDR4
    Latest Intel 2x CPU
    30GB SSD hardware RAID10
    London/New York/Amsterdam
    Windows 2008.R2/2012.R2
    Hardware Level VM
  • #5 by Tim (WellDoneSoft) on 20 Jul 2024
  • Please follow instructions:

    • Switch test mode ON!
    • Delete all markets from My markets (as they are finished)
    • Add some markets to My Markets. Make sure you add markets are actually used in your triggers - sport / market type / etc.
    • Make sure the markets are refreshing. Start them manually or better set to start each X minutes before the off (X should be enough, depends on your triggers) within the program settings -> monitoring tab
    • Make sure the triggering switch is on (a "bulb" button within the Triggers link should be green)
    • Wait for the moment your triggers should fire. Open Triggers window (as on your screenshot) and watch each trigger's messages - there should be a reason the trigger is not firing.
  • #6 by Talha on 20 Jul 2024
  • This trigger doesn't want to turn on like it used to: https://marketfeeder.co.uk/learn/triggers/lay-horses-form/

    I tried this trigger, and it works normally: https://marketfeeder.co.uk/learn/triggers/lay-strike-rate/

    I tried doing what you wrote Tim (WellDoneSoft)  but it doesn't work. I did not change the trigger settings at lay the form.
  • #7 by MarkV on 21 Jul 2024
  • Hi
    Try this:
    close the program
    delete all the files in this folder:
    c:\Users\%username%\MarketFeeder Pro 8\profiles\%profile name%\logs\
    where:
    %username% is your Windows username
    %profile name% is the profile name in this case: lay-horses-form  
    restart the program and see if the problem is fixed
  • #8 by Talha on 21 Jul 2024
  • I solved the problem by first opening the program without the trigger. Then I opened the program with the trigger mentioned above again and closed the first one (without trigger). And it's running smoothly right now. Bok also tried as you described MarkV. I'll let you know when I try.

    Thank you and best regards
  • #9 by Talha on 23 Jul 2024
  • Hello,

    MarkV, problem solved as you wrote. 

    Thank you.
Pages:
Actions