Recent Posts

11

Troubleshooting / Re: MFP CRASHES

« Last post by lmidgy on 01 Jun 2025, 23:10 »

Hi,
Same is happening for me- is there any solution to this problem?

Thanks,
David

12

Triggered betting / Re: Selecting a runner based on bsp

« Last post by djmotion on 28 May 2025, 20:06 »

Test on time machine* sorry

13

Triggered betting / Selecting a runner based on bsp

« Last post by djmotion on 28 May 2025, 20:05 »

Hey,

I'm just wondering if it's possible to select a runner based on the BSP. Say I want to place a bet on the next runner with a BSP over 5, so say the next runner is 5.75, is it possible for MF Pro to place a bet on that runner at BSP. Basically I've calculated a system using results and BSP from timeform (assuming these are accurate), I want to program a trigger that would place the exact bets I've calculated so I'd need to program it then test it on the same markets on timeform.

Also, is there any way to know what amount of money is or was available at BSP?

14

Find a trigger developer / Paid Trigger?

« Last post by Matt Marsh on 27 May 2025, 13:11 »

[font=等线]Hi,
[font=等线]I understand there may be problems with the MFPro trigger development service at the present time. As such, are there any individuals from the forum [font=等线]who[font=等线] [font=等线]could fulfil this service at the moment?
[font=等线] 
[font=等线]I am looking for a paid trigger that backs my imported selections if the previous (remembered) selection in the previous named market has won.
[font=等线] 
[font=等线]Example: 7 races at York: 
[font=等线]2.00 lost (remember event result)
[font=等线]2.30 won (Activate betting trigger for next race)
[font=等线]3.00 lost (deactivate betting trigger for next race)
[font=等线]3.30 won (Activate betting trigger for next race)
[font=等线]4.00 won (deactivate betting trigger for next race but activate remember trigger)
[font=等线]4.30 lost (remember event result)
[font=等线]5.00 lost (last race)
[font=等线] 
[font=等线]No minimum odds for a winner to trigger the next event but the actual [font=等线]“real” [font=等线]back bets to have min odds of 1.90
[font=等线]Ideally I would like to have the above for all individual horse race meetings, [font=等线]i.e.: York[font=等线], [font=等线]Bath[font=等线], [font=等线]Epsom[font=等线] [font=等线]are all individual events/triggers, but if easier I could have multiple MFPro's with different profiles for each meeting.
[font=等线]Hope that makes sense!

15

Find a trigger developer / Re: Help with Horse racing trigger

« Last post by Dukeee5138 on 23 May 2025, 09:50 »

Hi
Have a look at Item 3 here. That should sort it.

Hi,

I tried multiple times to modify the trigger using the method you suggested. But I don't know what I am doing wrong and it is not working.

The trigger continues to misbehave like before placing simultaneous bets instead waiting for the previous matched bet to be Settled.

I have attached the base trigger and the modified trigger.

Can I please have some help.

Thank you for your time.

16

Find a trigger developer / Trigger getting stuck after running for a day or 2

« Last post by Dukeee5138 on 23 May 2025, 09:42 »

Hi,

I am trying to run slightly modified version of the Little Acorns system with the Fibonacci sequence staking plan in horse racing. 

The base trigger runs fine but I need to modify it to ensure that it does not place a second bet before the previous matched bet is settled.

I tried doing using the below method.

https://marketfeeder.co.uk/learn/triggers/limiting-the-number-of-simultaneous-market-entries/

When I run this trigger in test mode it runs fine and behaves as it should. I tested it over a 2 week period. The problem is that in real money mode it runs fine for a day or 2 and then gets stuck. 

I have attached a screenshot of the trigger logs of the condition in the laying trigger that it gets stuck at.

I have also attached the base trigger as well as the modified trigger.

Any help will be greatly appreciated.

Thank you.

17

Troubleshooting / Re: Tennis Set Betting

« Last post by donbeakarnt on 09 May 2025, 21:53 »

Works. Thanks for your help.

18

Troubleshooting / Re: MFP CRASHES

« Last post by Luis Miguel on 08 May 2025, 16:00 »

I can't see the program logs from yesterday which is when the software crashed.

19

Troubleshooting / Re: MFP CRASHES

« Last post by MarkV on 08 May 2025, 15:40 »

Are there any red errors in the program log?

20

Troubleshooting / Re: MFP CRASHES

« Last post by Luis Miguel on 08 May 2025, 15:28 »

I've tried that and the same thing always happens. A bar appears at the top next to the balance and the software is doing a refesh and ends up getting stuck (I don't have an image)