31
Troubleshooting / Re: Start trigger to load variables then pause monitoring.
« Last post by mikethebet on 27 Jun 2022, 09:24 »Excellent thanks
Mike
Mike
Recent Posts
32
Fórum Português / Re: Ajuda com configuração
« Last post by ROSELY LAMOUNIER on 26 Jun 2022, 16:18 »Estou quase desistindo do MF e voltando a apostar de forma manual, pois infelizmente eu não consigo fazer esse software funcionar conforme as expectativas.
33
Fórum Português / Ajuda com configuração
« Last post by ROSELY LAMOUNIER on 26 Jun 2022, 15:13 »Saudações!
Eu estava usando o MF normalmente em meu computador, mas agora eu instalei ele em uma VPS e não estou conseguindo fazer o programa rodar corretamente igual antes. Quando eu ligo o gatilho, ele so entra na primeira corrida, nas outras corridas aparece a mensagem: "Evento anterior utilizado pelo trigger. Estado não foi resolvido." O gatilho não entra em mais nenhuma corrida a menos que seja reiniciado. Não aparece nenhuma mensagem de erro nos logs, então acredito que o problema seja nas configurações. Alguém me orienta qual campo eu marquei ou desmarquei nas configurações?
Eu quero ligar o gatilho e deixar ele no piloto automático.
Eu estava usando o MF normalmente em meu computador, mas agora eu instalei ele em uma VPS e não estou conseguindo fazer o programa rodar corretamente igual antes. Quando eu ligo o gatilho, ele so entra na primeira corrida, nas outras corridas aparece a mensagem: "Evento anterior utilizado pelo trigger. Estado não foi resolvido." O gatilho não entra em mais nenhuma corrida a menos que seja reiniciado. Não aparece nenhuma mensagem de erro nos logs, então acredito que o problema seja nas configurações. Alguém me orienta qual campo eu marquei ou desmarquei nas configurações?
Eu quero ligar o gatilho e deixar ele no piloto automático.
34
Troubleshooting / Don't bet if no bet to be canceled
« Last post by RManPT on 26 Jun 2022, 14:22 »Hi all.
Hi have a trigger to move a lay bet that has as a condition that the checks that the number of unmatched lay bets is greater than 0 and has a 'Cancel then lay' action in which I chose the option 'Do not bet if no bets to cancel' because I was having an issue with double lays before and then I found this option, that I thought would resolve the issue, but...
Although in the 'Program log' I get the error launched because there were no bets to be canceled the lay is still being done. Am I doing something wrong? How could I make sure there is only one bet matched?
Thanks in advance
Hi have a trigger to move a lay bet that has as a condition that the checks that the number of unmatched lay bets is greater than 0 and has a 'Cancel then lay' action in which I chose the option 'Do not bet if no bets to cancel' because I was having an issue with double lays before and then I found this option, that I thought would resolve the issue, but...
Although in the 'Program log' I get the error launched because there were no bets to be canceled the lay is still being done. Am I doing something wrong? How could I make sure there is only one bet matched?
Thanks in advance
35
Triggered betting / Re: TRIGGER FOR BLACKJACK
« Last post by calsim on 26 Jun 2022, 14:02 »I am sorry I forgot to say that this is a lay bet
36
Triggered betting / Re: TRIGGER FOR BLACKJACK
« Last post by Tim (WellDoneSoft) on 26 Jun 2022, 13:59 »37
Triggered betting / TRIGGER FOR BLACKJACK
« Last post by calsim on 26 Jun 2022, 13:58 »Hello I need a trigger that will do the following.
Only bet in round 2 when only one selection has chance of winning 5 cards or more.
the other 3 selections must be stood in round 2.
the remaining selections total points should be between 7 and 9. eg 4+4 or 4+5
The remaining selection or dealer should not contain an Ace card.
All help will be greatly appreciated. Thanks in advance.
Only bet in round 2 when only one selection has chance of winning 5 cards or more.
the other 3 selections must be stood in round 2.
the remaining selections total points should be between 7 and 9. eg 4+4 or 4+5
The remaining selection or dealer should not contain an Ace card.
All help will be greatly appreciated. Thanks in advance.
38
Triggered betting / Re: Trigger conditions not met consistently
« Last post by shakeshuck on 26 Jun 2022, 13:30 »Still no joy I'm afraid.
I'll post the whole trigger here to see if anyone can spot my deliberate mistake...
It appears to work when it feels like it, and not others. I realise there are issues if any bet goes below 1 penny, but it frequently fails when that isn't the case.
I'll post the whole trigger here to see if anyone can spot my deliberate mistake...
It appears to work when it feels like it, and not others. I realise there are issues if any bet goes below 1 penny, but it frequently fails when that isn't the case.
39
Troubleshooting / Re: Start trigger to load variables then pause monitoring.
« Last post by Tim (WellDoneSoft) on 26 Jun 2022, 09:07 »Morning, Mark 
You are the best, thank you!
You are the best, thank you!
40
Troubleshooting / Re: Start trigger to load variables then pause monitoring.
« Last post by MarkV on 26 Jun 2022, 09:04 »Hi
Just continue to monitor the markets but at a slow refresh rate. For example:
start monitoring markets 10am, get variables set etc.
set market idle refresh rate to say 240 secs between 10:15 and 10:30
set market idle refresh rate to say 30secs when minutes before the off is between 2 and 5
set market idle refresh rate to 1sec when minutes before the off is less than 2
several triggers are needed to steadily speed up refresh rate because if refresh rate is changed from 240 to 1 at 2mins before the off it may not catch the 4 minute (240sec) refresh
example trigger:
set market idle refresh rate to: 240
first matching selection
all markets
once per market
conditions:
global current time is between 10:15 and 10:30
and one of the variables you want set has a value
Just continue to monitor the markets but at a slow refresh rate. For example:
start monitoring markets 10am, get variables set etc.
set market idle refresh rate to say 240 secs between 10:15 and 10:30
set market idle refresh rate to say 30secs when minutes before the off is between 2 and 5
set market idle refresh rate to 1sec when minutes before the off is less than 2
several triggers are needed to steadily speed up refresh rate because if refresh rate is changed from 240 to 1 at 2mins before the off it may not catch the 4 minute (240sec) refresh
example trigger:
set market idle refresh rate to: 240
first matching selection
all markets
once per market
conditions:
global current time is between 10:15 and 10:30
and one of the variables you want set has a value