Recent Posts

Pages: « 1 2 3 4 5 6 7 8 9 10 »
71
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by rubold on Wed, 13 February, 2019, 20:58 »

General Options:
Untick show a popup window

Market Settings:
Change Delete Settled events to Finished events  -  the  triggers require the result of the previous triggered market although it should have been fine with leaving 50 events, you could reduce this to 6-10.  

Betting Options are fine

Monitoring Options:
Tick Synchronise local time......
Untick Request data from betfair.......  - There have been problems in the past with zipped data and it is not necessary.

I would start monitoring at 0.5 - 1 min before off.  You could change the IN-play refresh rate to 2 sec as you won't be laying in-play.
72
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by mk34 on Wed, 13 February, 2019, 20:36 »
Screenshots below. I've not changed an awful lot in there from the default really, mainly market refresh rate.
73
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by rubold on Wed, 13 February, 2019, 20:24 »
The last value of current_bet will be remembered after you switch of computer or close program or whatever.  I need to see the first three tabs of your Settings window.

The triggers will usually keep operating when you open the Triggers editor, by pressing the Triggers Editor button.  However, if you press the Open Trigger button and then select your trigger, the Triggers light bulb will change to Red and will cease operation until you save and reload.
74
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by mk34 on Wed, 13 February, 2019, 19:47 »
In fact, while I was typing my last message, I had the Trigger Editor open and the triggers stopped. Seems the triggers switch themselves off while being edited perhaps?
75
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by mk34 on Wed, 13 February, 2019, 19:35 »
I was getting the error on the lay trigger, the 4th and final trigger on the original setup. I must have tweaked something else that was upsetting it, I was trying to fiddle around without really understanding.

Anyway, the first screenshot below is with the lay trigger changed to idle/suspended and that does appear to be blocking the lays from triggering on an in-play market, although at the minute I have not witnessed a market go in-play without a lay and then try to trigger. But it seems that would not be an issue (when I was testing last night, I had a lay trigger in the very final stages of a race when the eventual winner was already trading about 1.05)

Ignore the changes I've made to min_runners and max_odds, I just want a bit more action while i'm testing out the various settings.

The second screenshot is, I think, as you've suggested. Current_bet set to 10 (identical to unit_size), but to remember the last value that was triggered. And then I've deleted the 1st trigger.

So this should now in theory remember the last stake, even if the software is closed, laptop rebooted etc, and still apply all the other usual conditions of increasing/reducing the unit_size? Let's say the last trigger stake was 20 and that lay was successful, the next stake should be 18, do you think that would be applied after a software reboot?

Cheers.
76
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by rubold on Wed, 13 February, 2019, 19:13 »
Sorry forgot to change current_bet to the same as unit_size (10) in that screenshot.   Then delete the first trigger under constants.
77
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by rubold on Wed, 13 February, 2019, 19:11 »
I have used this trigger and it works as described.  The logs will show you if anything is wrong with your settings.  Where are you seeing "Inappropriate State of market"?  I would start monitoring at 15 sec before off (in settings); synchronise computer time with Betfair.   Send me  screenshots of the first 3 tabs of settings.

If you add the variable current_bet as a constant with the same initial value as unit_size and set it's action as "Remember Last Value", it should retain the value if you close and restart the program. You would also need to delete the first trigger "Initialising current bet".   See attached screenshot:
78
Triggered betting / Re: Triggers on Laypro88 - correct?
« Last post by mk34 on Wed, 13 February, 2019, 18:33 »
Thanks for the reply.

I did change the lay setting to 'idle or suspended' but then nothing was triggering due to 'inappropriate state of market (finished)'. Is that normal? Usually it would not trigger due to failures in the other criteria but then keep moving on to the next markets. When I tweaked it to idle/suspended, it just seemed to stop looking forwards to the next markets.

Thanks for the other explanation about the first trigger/software restart. That makes sense. Could I please also ask is the software intelligent enough to 'remember' what the next stake would be in the sequence is you restart it?
79
Triggers / Re: Back/Lay Trap Galgos
« Last post by mpeva17 on Wed, 13 February, 2019, 17:23 »
Boa tarde Oxa!

Vou começar a testar agora mesmo.
Obrigado pela atenção e pelo seu trabalho.
80
Triggered betting / Re: Back bet and recover loss
« Last post by Oxa (WellDoneSoft) on Wed, 13 February, 2019, 14:29 »
Hello!

You can start from here and adjust the triggers (remove/add constants, change lay for back, etc.):

Laying on Greyhounds with loss recovery

If you need help, please create a trigger request.
Pages: « 1 2 3 4 5 6 7 8 9 10 »