Pages:
Actions
  • #1 by Damian on 10 May 2016
  • Hi, if possible could I have a staking plan make such that after each loss the bet amount is increased. The trigger should back a set market which may be left blank and configured by the user.
    An added condition should be that the matched volume in the market is above a certain amount.

    The staking plan is as follows:
    Start size of 1 unit and increase to a higher amount after each bet that may also be configured by the user.

    ie.
    After 1 loss - x units
    After 2 losses - y units
    After 3 losses - z units

    Up to 10 losses and after a win it is reset to 1 unit.

    Thank you.
  • #2 by mcbee on 10 May 2016
  • hi
    what do you want to do when it reaches 10 losses in a row.
    re-set to 1 unit or continue betting at level 10 stake amount.

    mcbee
  • #3 by mcbee on 10 May 2016
  • hi
    it would also be nice to know what the selection conditions are, rank or index etc.

    mcbee
  • #4 by Damian on 11 May 2016
  • At 10 losses continue betting at that amount please.
    Conditions for selection are:
    Name equal to "xxx"
    Index equal to 1
    Back Matched equal to 0

    Thanks
  • #5 by Damian on 11 May 2016
  • Just to add to my previous post after loss 10 can it bet at that amount until the loss is recovered and then revert to 1 unit.
  • #6 by mcbee on 11 May 2016
  • hi
    after loss 10 can it bet at that amount until the loss is recovered
    this is a problem because your previous condition is      after a win it is reset to 1 unit .
    what do you want to do recover the full loss then bet at 1 unit or bet at 1 unit after a win.

    mcbee
  • #7 by Damian on 11 May 2016
  • Hi, yes sorry I see the problem in my logic there.
    Perhaps it is best to revert to the 1 unit bet only once all loss has been recovered.
  • #8 by mcbee on 14 May 2016
  • hi
    here is your trigger,in the constants you can set.
    Unit amount
    Markets name   
    Selections name
    Minimum market matched volume
    Loss 1           units 2
    Loss 2           units 3
    Loss 3           units 4
    Loss 4           units 5
    Loss 5           units 6
    Loss 6           units 7
    Loss 7           units 8
    Loss 8           units 9
    Loss 9           units 10
    Loss 10         units 11

    please use test mode until you are happy with your settings

    mcbee

    download the trigger below


  • #9 by Damian on 17 May 2016
  • Thanks mcbee works perfectly  :)
Pages:
Actions